Sixth Element Singapore
Material
Silicone + Ln
Cable hole
Ø 5 / 6 mm
Heat range
−50→200 °C
Warranty
1 year

What quantum tuning does

Tuning at the point of contact.

Every Sixth Element piece is built on A.I.S., the Acoustics Improvement System. The lanthanide elements are built into the material itself, so there's nothing to charge and nothing wears off. It doesn't add power. It cleans up the signal that's already there.

LOW

Bass

Deeper and better controlled, with less boom.

MID

Vocals and instruments

Tighter and fuller, so voices sit forward in the mix.

HIGH

Detail and air

Clear, transparent highs, with more room around each note.

Headphones with two QBR-525 Quantum Balls on the cable Grooved edgethe wire wraps round here Ø 25 mm · 8 g

How it works

Wrap it on in seconds. No tools.

  1. 01

    Wrap it on

    Place the ball on your headphone cable and wrap the wire around its grooved edge. It stays in place without tools or adhesive.

  2. 02

    Play a track you know well

    Listen for the soundstage opening up and the bass tightening. For a balanced effect, add one on each side of the cable.

  3. 03

    Leave it there

    No battery and no expiry. It keeps working for the life of the product.

QBR-525 balls on a thick braided cable and a thin clear cable

Fits the cable you already own

Thick braided or thin and clear, it works on both.

The QBR-525 has two cable holes, 5 mm and 6 mm, plus a grooved edge for the wire to wrap around. It suits full-size headphones, IEMs, and phone or DAP cables.

  • Braided
  • Rubber
  • Clear / silver-plated
  • IEM

Thicker cable? The QBR-533 (S$146) is the bigger ball: 29 mm, with 11 mm and 8 mm holes for speaker wires and signal cables.

Fitted by pro installers

Trusted by Japan's car-audio installers.

Competition car-audio buildA "Natural Sound" boot install with twin Micro-Precision amplifiers, tuned with Sixth Element.
Rocket Sticker on an amp boardST-RX Rocket Sticker (15 mm), the earlier generation of today's MARS Sticker, on the capacitors and power-supply cans of a car amplifier.
DTX Pad on a speakerOne DTX 3D Quantum Pad (S$84) on the back of a Ground Zero car speaker, fixed with 3M adhesive.

Photos: Sixth Element partner, Japan

7 yearsJapan awards in a row, including Audio Accessory and MJ Radio & Experiment
PatentedTaiwan patents M499102 and M548422
SGSSGS safety certified, and certified on Sixth Element's IT-300 test instrument
DirectGenuine stock sourced from Sixth Element HQ, Taipei

Shop by where you use it

One field. Five places to feel it.

Hear it before you buy

Come in and try it on your own headphones.

Bring your headphones to our Far East Plaza store and we'll set up a side-by-side listen. We're the team behind Jason & Sherron Handmade, a Singapore atelier trusted by the city's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Products / PowerBar

Fits
12V socket
Diameter
20.5 mm
Length
52 mm
Power needed
None

How it works

Your car runs on one electrical system. Tune it at the source.

Your battery, ignition, sensors and sound system all share the same wiring. The PowerBar sits in the 12V socket, which connects straight into that circuit. The lanthanide elements inside set up a quantum field that smooths the current passing through, the same A.I.S. technology found in every Sixth Element product.

  1. 01

    Find a free 12V socket

    It's the round cigarette-lighter socket on your dash or centre console. If you use it for a phone charger, add the Socket-4 splitter so you keep your charging port.

  2. 02

    Push the PowerBar in

    It seats like a lighter plug. No wiring, no tools, nothing to set up.

  3. 03

    Drive as usual

    Leave it in. There's no battery and no expiry, so it keeps working for the life of the product.

Up close

Small enough to disappear into your dash.

Each PowerBar is 20.5 mm across, about the width of your car's 12V socket, with the model engraved on the body.

PowerBar V1s in red
V1s · Red52 mm · 42 g · S$258
PowerBar V1 in olive green
V1 · Olive48 mm · 38 g · S$178
PowerBar PB in blue
PB · Blue48 mm · 38 g · S$138
  • Gold contact tipThe end that goes into the socket first.
  • Engraved model nameV1s, V1 or PB, so you always know which one you have.
  • Grip rings at both endsEasy to push in and pull back out.

Compare models

Three PowerBars. One fits every budget.

V1s · RedV1 · OlivePB · Blue
PriceS$258S$178S$138
Size20.5 × 52 mm20.5 × 48 mm20.5 × 48 mm
Weight42 g38 g38 g
Tested on IT-300 rigYes——
Best forThe full effectEveryday drivingA first try

Complete the setup

Keep your charger port. Fit your bike.

PowerBar Socket-4 (on/off switch)

A 4-way 12V splitter with a power switch. Run the PowerBar and still charge your phone.

PowerBar Socket-1 (motorcycle)

A DC socket for motorcycles, so riders can fit a PowerBar too.

ST-RT MARS Sticker (15 mm, 5 pcs)

Add these to the battery terminals, fuse box and ignition coil to tune the rest of the circuit.

S$203ADD →
Competition car-audio buildA "Natural Sound" boot install with twin Micro-Precision amplifiers, tuned with Sixth Element.

Fitted by pro installers

Where serious car audio lives.

Japan's specialist installers build Sixth Element into competition-grade systems. The PowerBar is the easy way in: no tools, just plug it into a spare 12V socket.

Photos: Sixth Element partner, Japan

Dyno tested in Singapore

Before and after, on a Dynapack dyno.

Two Mitsubishis, run on the same chassis dynamometer at Tham Seng Autotronic in Singapore, before and after Sixth Element was installed. Both cars made more power and more torque.

+5 to 9%more peak power
+5 to 9%more peak torque
2 carstested on a Dynapack
SAEstandard correction

TEST 01 · 16 JAN 2008

Mitsubishi Lancer CS3

Peak power+9.2 hp +8.5%
Before107.7 hp@ 6,185 rpm
After116.9 hp@ 6,035 rpm
Peak torque+13.6 Nm +9.4%
Before145.1 Nm@ 3,123 rpm
After158.7 Nm@ 2,874 rpm

Peak torque now arrives earlier, at 2,874 rpm instead of 3,123. The gain holds across the whole rev range, from 1,500 to 6,800 rpm.

TEST 02 · 11 JUN 2008

Mitsubishi Colt VR

Peak power+8.1 hp +5.2%
Before154.8 hp@ 6,170 rpm
After162.9 hp@ 6,358 rpm
Peak torque+11.2 Nm +5.3%
Before209.8 Nm@ 4,480 rpm
After221.0 Nm@ 4,485 rpm

Stronger from about 2,900 rpm to redline, with the biggest gains between 3,300 and 4,500 rpm, where you do most of your overtaking.

Tested by Tham Seng Autotronic, Singapore, on a Dynapack chassis dynamometer. Flywheel figures, SAE correction. Red = before, blue = after installing Sixth Element. Results from one car in one session each. Your car may differ.

7 yearsJapan awards in a row, including Audio Accessory and MJ Radio & Experiment
PatentedTaiwan patents M499102 and M548422
SGSA.I.S. technology is SGS certified
DirectGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you plug in.

Do I need to charge it or switch it on?

No. The PowerBar has no battery and no electronics to switch on. The lanthanide elements are built into the material, so it works for the life of the product.

Will I lose my phone charger socket?

Only if your car has just one 12V socket. Add the Socket-4 splitter and you can run the PowerBar and a charger together.

Does it work on motorcycles?

Yes, with the Socket-1 DC socket for motorcycles fitted first.

Which model should I choose?

V1s is the flagship and the model Sixth Element tests on its IT-300 rig. V1 is the everyday choice, and Blue is an easy way to try the technology.

Can I try it before I buy?

Yes. Drop by our Far East Plaza store and we'll talk you through it.

Talk to us

Not sure which PowerBar suits your car?

Visit our Far East Plaza store. We're the team behind Jason & Sherron Handmade, a Singapore atelier trusted by the city's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Products / MARS Sticker

Sizes
10 · 15 · 35 mm
Patent
M548422
Trademark
872822111
Effect
Permanent
03 ADHESIVE 02 LANTHANIDE CORE 01 A.I.S TOTEM

Inside the sticker

Three layers. One patented sandwich.

  1. 01

    A.I.S totem print

    The printed Sixth Element emblem. It doubles as an anti-counterfeit mark, so you know it's genuine.

  2. 02

    Lanthanide core

    The working layer. Rare-earth lanthanide elements carry the A.I.S. quantum tuning effect.

  3. 03

    Upgraded adhesive

    Holds tight contact with your equipment. The effect is permanent, but the adhesive can only be stuck once.

Where to stick it

Pick your setup. We'll tell you which size goes where.

  • Battery terminalsBoth the positive and the negative
    ST-RT 15 MM
  • Fuse box, ignition coil, electronic throttleInside the engine bay
    ST-RT 15 MM
  • Radiator, intake path, MAF sensor, oil filter, fuel pump, brake fluid reservoirMore engine-bay points
    ST-RT 15 MM
  • Dashboard sides, pillars, ceiling, interior panelsInside the cabin
    ST-RS 35 MM
  • Side windows, one per windowFront left: upper left corner. Rear left: upper right. Front right: upper right. Rear right: upper left. All on the inside of the glass.
    ST-RT 15 MM
  • Wheel rims, one per rimFour in total, for a balanced effect
    ST-RT 15 MM

Works on cars, motorcycles, hybrids, trucks and buses. Pair it with a PowerBar in the 12V socket.

Fitted by pro installers

Inside the amp. Behind the speaker.

Rocket Sticker on an amp boardST-RX Rocket Sticker (15 mm), the earlier generation of today's MARS Sticker, on the capacitors and power-supply cans of a car amplifier.
DTX Pad on a speakerOne DTX 3D Quantum Pad (S$84) on the back of a Ground Zero car speaker, fixed with 3M adhesive.

Photos: Sixth Element partner, Japan

AA 2026Audio Accessory award, Japan, 2026
PatentedPatent M548422 · trademark 872822111
Since 2019Sixth Element has won Japan audio awards every year
Taiwan madeGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you stick.

Can I test it before sticking it down?

Yes, and you should. Keep the backing paper on and place it in the middle of the device, or about 2 cm above your speaker terminals. When you're happy with the sound, peel and stick.

Which size should I start with?

ST-RT (15 mm) fits the most places: speakers, phones and your car's engine bay. Choose ST-RS (35 mm) for large surfaces and for above the speaker terminals, and ST-RA (10 mm) for tight spots like USB ports and circuit parts.

Can I mix sizes, or use them with other Sixth Element products?

Yes. All three sizes work together, and alongside other Sixth Element stickers, the PowerBar and the Quantum Ball.

What's the Customized MARS Sticker?

A 35 mm special edition that layers different MARS Sticker types in one disc, in a combination Sixth Element has tested for the best overall effect.

Can I move it later?

The effect doesn't wear off, but the adhesive only sticks once. Test first, then commit.

Talk to us

Not sure where to start? Bring your gear in.

Visit our Far East Plaza store and we'll test a MARS Sticker on your speakers or phone with you, backing on, before you buy.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Products / PowerChip

A.I.S · Quantum tuning · Where it began

Sized to your engine. Tied on in minutes.

The PowerChip is where Sixth Element started, before the PowerBar. It's a solid A.I.S. sphere that ties onto your car's fuel line, air intake or ignition wiring with the heat-resistant cable tie in the box. Nothing is cut or modified, and it uses no power at all.

Pick your engine size and we'll select the right chip. A bigger chip is fine on a smaller engine, but not the other way round. The flagship T1 fits every engine.

RED SUPER VERSION · SHOWN TO SCALE

10-year warranty · heat-resistant cable tie included

FIT · A1 FLOW NOISY
ENGINE BAY ENGINE + − BATTERY / IGNITION AIR INTAKE RADIATOR FUEL LINE
  1. Pick the size for your engine
  2. Tie it onto the fuel line
  3. Field on. Flow steadied.
Sizes
20.5–44.5 mm
Heat rating
250 °C body
Power needed
None
Warranty
10 years

Where to fit it

Built for the engine bay. Welcome in your hi-fi too.

Engine bay

Fuel line, air intake, ignition wiring, air-flow sensor, radiator hoses, battery terminals, electronic throttle, A/C lines, brake and power-steering lines, transmission, shock absorbers.

FIT IT YOURSELF · NOTHING IS CUT

Car and home audio

On the power and signal cables of your car stereo or hi-fi system.

FIT IT YOURSELF

Home power

On the cables in your home's distribution board, like the photo below.

FITTED BY A LICENSED ELECTRICIAN
IN THE BOX: 1 × POWERCHIP1 × KSS HEAT-RESISTANT CABLE TIE (145 °C)
PowerChips tied onto the cables inside a home distribution board
PowerChips tied onto the cables of a home distribution board. Photo: Sixth Element.

How it's fitted

A cable tie. That's the whole install.

Thread the cable tie through the chip's holes, pull it snug around the line and trim the end. Nothing is cut, stripped or rewired, and you can move it to your next car.

SAFETY FIRSTFit chips with the engine off and cool, clear of belts, fans and the exhaust. Inside a home distribution board, always use a licensed electrician.

Compare sizes

Six sizes, matched to engine capacity.

Model (Red · Super)DiameterEngine sizeWeightPrice
PowerChip-FS20.5 mmUp to 1600 cc8 gS$71
PowerChip-A225 mmUp to 1800 cc13 gS$102
PowerChip-A2e29 mmUp to 2500 cc18 gS$136
PowerChip-A132 mmUp to 3000 cc27 gS$187
PowerChip-IP39 mmUp to 3500 cc55 gS$260
PowerChip-PP44.5 mmOver 3500 cc88 gS$391

Fits every engine size. A 32 × 37 × 39 mm chip on a cross-shaped base that straps down with the two heat-resistant cable ties in the box. Use it on battery terminals, the fuel inlet line, A/C and transmission lines, engine computer wiring, or your audio signal and speaker cables. It's the PowerChip Sixth Element tests on its IT-300 rig.

Add PowerChip-T1 to cart · S$333

Competition car-audio buildA "Natural Sound" boot install with twin Micro-Precision amplifiers, tuned with Sixth Element.

Fitted by pro installers

From the engine bay to the boot.

Sixth Element partners in Japan fit PowerChips and stickers into full car-audio builds like this one.

Photos: Sixth Element partner, Japan

The originalSixth Element's first product, before the PowerBar
10 yearsWarranty on every PowerChip. The effect doesn't wear off.
250 °CEngineering-plastic body, made for the engine bay
Made in TaiwanGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you fit it.

Which size do I need?

Go by your engine size: FS up to 1600 cc, A2 up to 1800 cc, A2e up to 2500 cc, A1 up to 3000 cc, IP up to 3500 cc, and PP over 3500 cc. A bigger chip works on a smaller engine, but a smaller chip won't cover a bigger one.

Will it affect my car's warranty?

It ties on the outside of a line with a cable tie. Nothing is cut, drilled or rewired, and no original parts are changed.

What's in the box?

One PowerChip and one KSS heat-resistant cable tie rated to 145 °C. The T1 comes with two.

What about the T1?

The T1 is the flagship. It isn't round: it sits on a cross-shaped base and fits every engine size, so you don't need to match it to your cc. It works on car systems and on audio signal and speaker cables.

Can I move it to my next car?

Yes. Snip the cable tie, and fit it to your next car with a new heat-resistant tie. Check the engine size still matches.

Blue or red?

Sixth Element makes every size in Blue (Standard) and Red (Super). We stock the Red Super versions, which are matched to the engine sizes above.

Does it work with the PowerBar?

Yes. Sixth Element designs the PowerChip and PowerBar to be used together.

Talk to us

Tell us your car. We'll match the chip.

Visit our Far East Plaza store or send us your car model and engine size, and we'll recommend the right PowerChip.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Applications

A.I.S · Quantum tuning · In the field

Where Sixth Element goes to work.

Real installs from Sixth Element partners and customers, sorted by where they're fitted. Pick a field to see the photos and the products used.

Your install here

Fitted Sixth Element? Send us a photo.

Send it to us on Instagram or WhatsApp, or bring it to the store. We'll feature the best installs on this page, with credit to you or your installer.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

© 2026 JNS Leather Atelier Pte Ltd Ships across Southeast Asia and worldwide

Home / Products / Quantum Ball

Diameter
25 mm
Cable holes
6 / 5 mm
Weight
8 g
Warranty
1 year

How it works

Put it where the signal travels.

Every note you hear runs down a cable, and the ball sits right on that path. The lanthanides inside set up what Sixth Element calls a quantum field, and the magnetic powder adds field lines of its own. Together they're designed to cut noise and tighten the sound.

  1. 01

    Pick your spot

    Just below the Y-split on headphones. On speaker cables, close to the terminals.

  2. 02

    Thread it through

    Loop the cable through the holes and seat it in the groove. It holds on its own.

  3. 03

    Add a second one

    One on each side of the cable gives a balanced effect. Then just listen.

Applications by category

Pick your setup. We'll show you where the ball goes.

  • Wired headphones and IEMsOne ball on each side, just below the Y-split
    QBR-525 × 2
  • Headphone lead from your DAP or phoneClose to the 3.5 mm or 4.4 mm plug
    QBR-525
  • Digital streamer and USB DAC cablesNear the connector at the device end
    QBR-525

In use

Small enough to live on any cable.

With a DAP and IEMsQBR-525 on an IEM cable next to a portable player.
On a braided IEM cableTwo balls, one on each side of the split.
On a thick interconnectQBR-533, sized for heavy cables.
At a CD player's outputsSeated on the cables right at the back panel.

Photos: Sixth Element

Compare models

Two sizes. Pick by cable thickness.

QBR-525QBR-533
PriceS$95S$146
Diameter25 mm29 mm
Weight8 g15 g
Cable holes6 mm / 5 mm11 mm / 8 mm
Best forHeadphones and IEMsSpeaker wires and interconnects
Warranty1 year3 years

Independent test

A skeptic tried it, with the volume matched.

In 2018, headphone reviewer Twister6 put Sixth Element's A.I.S accessories, Quantum Balls included, through A/B tests on two identical players at matched volume. He went in doubtful. What he heard was a blacker background and cleaner, quicker note edges. Not night and day, he said, but consistent every time.

READ THE REVIEW →

Complete the setup

Tune the rest of your listening.

R-575 3D Quantum Ring (PLUS)

Wraps around over-ear headphone cups, one per side.

ST-RT MARS Sticker (15 mm, 5 pcs)

On the back of your phone or DAP.

DS-1 3D Quantum Pad (PLUS)

Slip it under your music player or CD player.

7 yearsJapan awards in a row, including Audio Accessory and MJ Radio & Experiment
PatentedTaiwan patents M499102 and M548422
SGSA.I.S. technology is SGS certified
DirectGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you thread it.

Will it damage my cable?

No. The ball just wraps around the cable. Slide it off any time and nothing has changed.

One ball or two?

One works. Two, one on each side of the cable, give a more balanced effect, and that's how most people use them.

QBR-525 or QBR-533?

Go by cable thickness. If your cable fits the 525's 6 mm hole, use the 525. Thicker speaker wires and interconnects need the 533.

Does it need power, or wear out?

No power and no battery. The materials run right through the silicone, so there's nothing to recharge or replace. It handles −50 °C to 200 °C.

Can I try it first?

Yes. Bring your headphones to Far East Plaza and listen with and without.

Talk to us

Bring your headphones. Hear it for yourself.

Visit our Far East Plaza store and try the Quantum Ball on your own gear. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Products / Quantum Ring

Size
Ø75 × 5.5 mm
Weight
7.6 g
Heat range
−50 to 200 °C
Warranty
3 months

How it works

A ring of field around the signal.

The ring puts its A.I.S field all the way around whatever runs through it. Sixth Element designs it to balance resonance, so vocals and instruments come across fuller and more together.

  1. 01

    Choose the size

    Check what it goes over: a headphone cup, a cable, a plug, a valve or a mic.

  2. 02

    Slip it on

    Stretch it over gently. A little soap on your fingers helps with a snug fit.

  3. 03

    Leave it there

    No power, nothing to wear out. Move it to a new spot any time.

Applications by category

Pick your setup. We'll tell you which ring goes where.

  • Over-ear headphonesOne ring around each ear cup
    R-575 × 2
  • MicrophonesInside the mic head, or one on each end of the grip
    R-639
  • Mic and headphone cablesWrapped round the cable, figure-eight style
    R-575
  • Headphone plugs and connectorsSlid over the plug end
    R-639

In use

On mics, cables, valves and ankles.

On a microphoneR-639 fitted at the grip.
On an RCA interconnectSlid over the plug barrel.
On a power plugR-755 around a carbon-fibre connector.
Around valvesRings on a valve amplifier.
Round speaker cablesR-575 wrapped figure-eight style.
Worn as an ankletR-575 as an everyday style piece.

Photos: Sixth Element

Compare models

Three rings. Pick by what it goes on.

R-575R-755R-639
PriceS$112S$95S$84
SizeØ75 × 5.5 mm55 / 41 × 7 mm39 / 27 × 6 mm
Weight7.6 g7 g4 g
Best forEar cups, cables, wearingValves, plugs, thick cablesMics, small connectors
Warranty3 months3 years1 year

Complete the setup

Pair it with a ball, or wear more.

QBR-525 3D Quantum Ball (PLUS)

Threads onto headphone cables, one on each side.

QMB-55 Bracelet (PLUS)

The same A.I.S material, made as a bracelet.

QMN-66 Necklace (PLUS)

A necklace in the Personal Wearing range.

7 yearsJapan awards in a row, including Audio Accessory and MJ Radio & Experiment
PatentedTaiwan patents M499102 and M548422
SGSA.I.S. technology is SGS certified
DirectGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you slip it on.

Which size do I need?

Go by what it's going on. R-575 for headphone cups, cables and wearing. R-755 for valves, power plugs and thick cables. R-639 for mics and small connectors.

Is it a health product?

No. We sell it as an audio accessory and a style piece. Sixth Element states the ring has no medical effect.

Will it stretch out?

Normal wear won't affect it. Just avoid over-stretching, and use a little soap to slide it on and off.

Can I return it after wearing it?

Worn rings can't be returned for hygiene reasons, so try the fit in store first.

Does it need power?

No. The materials run right through the silicone, so there's nothing to charge.

Talk to us

Try the fit before you buy.

Drop by Far East Plaza to find your size and hear the ring on your own headphones. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Products / Quantum Pads & Tube

Size
200 × 250 mm
Thickness
2 mm
Weight
130 g
Goes
On top of gear

How it works

Your gear sits on something. Make it count.

Every component rests on a surface, and every surface carries vibration and stray fields. A Quantum Pad puts the A.I.S field right where the equipment meets the rack, the speaker or the record.

  1. 01

    Pick the surface

    Top of the chassis, under the feet, on the platter, or on a speaker's back panel.

  2. 02

    Lay it down

    Pads are flexible and just 2 mm thin, so they fit most gear. Fix a DTX with 3M tape.

  3. 03

    Listen

    Leave it in place. No power, nothing to wear out.

Applications by category

Pick your setup. We'll tell you which pad goes where.

  • Top of players, preamps, amps and projectorsOne big pad on the lid
    PRO-1
  • Under the four corners of your gearOne pad per corner
    DS-1 × 4
  • Turntable platterDirectly under the record
    PPX
  • Speaker back panels and room cornersFixed with 3M tape
    DTX
  • Under cables, or as a damper on gearRiser, damper or weight
    QAP-255

In use

On the lid, under the feet, under the record.

PRO-1 on a CD playerOne pad across the lid.
DS-1 at the cornersFour pads on the chassis.
PPX on the platterDirectly under the record.
DTX on a speaker backPads at the corners of the back panel.
DTX in a car speakerOn the back of a Ground Zero speaker, fixed with 3M tape.
QAP-255 in a hi-fi rackUsed as a riser and damper.

Photos: Sixth Element and Sixth Element partner, Japan

Compare models

Four pads and a tube. Pick by where it sits.

PRO-1PPXDS-1DTXQAP-255
PriceS$214S$560S$112S$84S$1,064
Size200 × 250 mmØ297 mmØ90 mmØ62 mm255 × 70 × 60 mm
Weight130 g160 g20 g10 g600 g
GoesOn top of gearUnder vinylUnder cornersSpeaker backsUnder cables
Also works asUnder-gear matTable matCoasterInternal upgradeRoom tuning

Independent test

The pad test that changed a skeptic's mind.

Reviewer Twister6 put two identical players side by side, one sitting on a Sixth Element pad, and switched between them at matched volume. He heard a blacker background and cleaner note edges on the pad side. A real difference, he said, if not a dramatic one.

READ THE REVIEW →

Complete the setup

Start at the source.

HE-R1 (PRO X) Disc Stabilizer

Sits on the CD itself, where the music starts.

R-755 3D Quantum Ring (PLUS)

Over valves and power plugs.

A.I.S Quantum Net OP-W31

Ties round your cable connectors.

7 yearsJapan awards in a row, including Audio Accessory and MJ Radio & Experiment
PatentedTaiwan patents M499102 and M548422
SGSA.I.S. technology is SGS certified
DirectGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you lay it down.

Which pad should I start with?

Start with DS-1 pads under your source (the CD player or streamer) or a PRO-1 on top of it. Add more once you've heard what it does.

Will it scratch my gear?

No. The pads are soft and flexible. DTX is non-conductive, so it's safe near circuits.

Can a pad go on top of my amp?

Yes, Sixth Element lists PRO-1 for amps. Keep the vents clear so your amp can breathe.

Does PPX replace my platter mat?

Yes. It sits on the platter directly under the record.

Can I try it first?

Yes. Come to Far East Plaza and we'll set one up for you to hear.

Talk to us

Not sure which pad suits your rack?

Tell us your setup and we'll suggest where to start. Visit our Far East Plaza store. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Products / Disc Stabilizer

Stickers
32 × ST-X
Thickness
0.57 mm
Which side
Both sides
Carrier
Carbon fibre

How it works

Two ways to fit it. Both work.

Your player reads the disc first, then sends that signal down the line. The HE-R1 sits right on the disc, or right above it, so the A.I.S field meets the music at the very first step.

  1. 01

    Tray loaders

    Open the tray, place the HE-R1 on top of the disc, and close it.

  2. 02

    Slot loaders and auto-changers

    Don't put it inside. Lay it on top of the player, right above the disc tray.

  3. 03

    Press play

    Sixth Element says the outside method tunes the source just as well.

Applications by category

Pick your player. We'll tell you where it goes.

  • CD players and CD transportsOn top of the disc, inside the tray
    PRO X · PRO
  • SACD, DVD and universal playersOn top of the disc, inside the tray
    PRO X · PRO

In use

On transports, trays and top plates.

PRO X on a high-end transportSitting on the disc under the clamp.
Two HE-R1s at the trayOne on the lid, one on the disc.
Award-winningJapan Audio Accessory award 2020, MJ Technology of the Year 2019.
The outside methodOn top of the player, over the tray.

Photos: Sixth Element

Compare models

Two versions. Same idea.

PRO XPRO
PriceS$672S$333
ST-X stickers3216
Thickness0.57 mm0.39 mm
Which sideEitherSticker side down
UHQCD and glass CDYesYes
Best forReference systemsA first try

In the press

Reviewed by Taiwan's hi-end press.

Hi-AV, one of Taiwan's long-running hi-end audio and home theatre sites, reviewed the HE-R1 and found it lifted both music and film playback. It's also recommended by Hi-Fi magazine editor Pu Hong-ching.

READ THE HI-AV REVIEW (CHINESE) →

Also in the range

More ways to tune your player.

KDS 3D Disc Stabilizer

A sister stabilizer in the Sixth Element range. Ask us in store.

KDSG 3D Disc Stabilizer

The top of the disc range. Heard by appointment.

DS-1 3D Quantum Pad (PLUS)

Four under the corners of your player.

7 yearsJapan awards in a row, including Audio Accessory and MJ Radio & Experiment
PatentedTaiwan patents M499102 and M548422
SGSA.I.S. technology is SGS certified
DirectGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you press play.

Will it fit my player?

In a tray loader, place it on the disc. In a slot loader or auto-changer, don't insert it. Put it on top of the player over the tray area instead.

PRO X or PRO?

PRO X has twice the stickers and works either way up. PRO is single-sided at half the price.

Is it safe for my player?

It's under 0.6 mm thin, made to sit on a disc in a standard tray. If your tray is tight or unusual, use the outside method.

Does it work with DVDs too?

Yes. It's made for both CD and DVD.

Can I hear it first?

Yes. Bring a CD you know well to Far East Plaza.

Talk to us

Bring a CD you know well.

Come to Far East Plaza and hear the HE-R1 on a disc you love. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Products / A.I.S Reference

Size
250 × 120 mm
Weight
8 g
Key spec
31 stickers
Goes
Cable connectors

How it works

Three layers of a system.

Once the source is tuned, the rest of the chain is the cables that carry the signal, the room it plays into, and the power behind it all. The reference series covers all three.

  1. 01

    Cables

    OP-W31 ties round the connectors, where the signal passes from one box to the next.

  2. 02

    Room

    QM5 stands in the listening space and works on the room itself.

  3. 03

    Power and grounding

    Power cables, grounding plugs and power units. We set these up by appointment.

Applications by category

Pick a layer. We'll show you what goes where.

  • Signal and speaker cable connectorsStickers facing the gear. Two on the right channel, one on the left
    OP-W31
  • Unused RCA and XLR inputsPlug the spare sockets
    R-4.1 · X-4.0
  • Splitting an RCA signalAt the output
    R-1.2

In use

Round the connector. In the room.

OP-W31 on a cableSlid over the connector and tied in place.
QM5 in a listening roomUpright on a pad, in its mesh bag.

Photos: Sixth Element

Compare models

Two pieces to start the reference series.

OP-W31QM5
PriceS$725S$1,064
Size250 × 120 mm140 × 100 × 35 mm
Weight8 g410 g (with accessories)
Works onCable connectorsThe listening room
How many3 for a stereo pair1 per room up to 7 m²

The reference range

Serious pieces. Heard by appointment.

These are big purchases, so we'd rather you hear them on a real system first. Book a session at Far East Plaza.

DTX-7.1 + DTX-5.1 3D Resonance TunerSpeaker and room resonanceS$942BOOK
R-4.1 RCA Grounding Tuning PlugGold or rhodiumS$259BOOK
X-4.0 XLR Grounding Tuning PlugMale or femaleS$333BOOK
R-1.2 RCA Splitter AdapterS$169BOOK
3DX PA CableTuning gold-silver cableS$951BOOK
ACXR Ground Cable (2.1 m)S$146BOOK
ACXRS$1,630BOOK
A.I.S POWER-3 Power Cable (2 m)S$1,460BOOK
A.I.S MARS PyramidS$2,196BOOK
A.I.S AC-DX Power OptimizerDC bias noise reductionS$5,066BOOK
AIS-5D Gold-Silver BARS$5,632BOOK
Customized MARS Sticker (35 mm)S$548VIEW

In the press

Reviewed by Hi-AV, Taiwan.

Hi-AV reviewed the OP-W31 Quantum Net and reported clearer backgrounds, a wider and deeper soundstage, and more energy and life in the music. Its editor went on to use Sixth Element pieces across both stereo and multi-channel systems.

Start here first

Tune the source before the system.

HE-R1 (PRO X) Disc Stabilizer

The CD itself, where the music starts.

DS-1 3D Quantum Pad (PLUS)

The pad QM5 stands on. Also great under a player.

QBR-533 Quantum Grounding Ball

For thick speaker and signal cables.

7 yearsJapan awards in a row, including Audio Accessory and MJ Radio & Experiment
PatentedTaiwan patents M499102 and M548422
SGSA.I.S. technology is SGS certified
DirectGenuine stock sourced from Sixth Element HQ, Taipei

Questions

Before you book a session.

Do I need all of these?

No. Most people start with the source (the HE-R1 and pads) and the cables (Quantum Balls or the OP-W31), then add room and power pieces later.

How do I fit the OP-W31?

Slip it over the connector with the sticker side facing the equipment, then tie the drawstrings. Sixth Element recommends two on the right channel and one on the left.

How do I set up the QM5?

Keep it in its black mesh bag and stand it upright on a DS-1 pad. One covers a room up to 7 m².

Why by appointment?

These are big purchases. We'd rather you hear them on a real system before you decide.

Can you fit power products for me?

We'll advise and set up plug-in pieces. Anything wired into your mains should be done by a licensed electrician.

Talk to us

Book a listening session.

Tell us about your system and we'll set up a session at our Far East Plaza store. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Shop by usage / Personal Audio

Shop by usage · 01 / AUDIO

Personal Audio. Tune what you carry.

Headphones, IEMs, music players and phones. Small A.I.S pieces that sit on the cable, the ear cup or the case.

7 products

Made for headphones, players and phones.

Applications

Where it goes on your listening gear.

Tap a product to see the full page.

  • Headphone and IEM cablesOne on each side, just below the Y-split
    QBR-525 × 2
  • Over-ear headphonesOne ring around each ear cup
    R-575 × 2
  • MicrophonesInside the mic head or on the grip
    R-639
  • Back of your phone, DAP or tabletStuck on the case or the device
    ST-RT · ST-RS
  • Next to USB portsBeside the port, not inside it
    ST-RA
  • Under your music playerA pad under the player
    DS-1

In use

In your pocket, on your desk.

On the goQBR-525 on an IEM cable next to a portable player.
On IEMsTwo balls, one on each side of the split.
On a micR-639 at the grip.

Photos: Sixth Element

Talk to us

Bring your headphones. Hear it for yourself.

Visit our Far East Plaza store and we'll walk you through it. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Shop by usage / Home System

Shop by usage · 02 / HOME

Home System. Tune the whole chain.

From the disc, to the cables, to the room. Pieces for hi-fi, CD and turntable, and home theatre.

12 products

From the source to the room.

Applications

Where it goes in your hi-fi.

Work from the source outward. Tap a product to see the full page.

  • The CD or DVD itselfOn the disc, or on the player above the tray
    HE-R1
  • Top of players and ampsOne pad across the lid
    PRO-1
  • Under your gearOne pad under each corner
    DS-1 × 4
  • Turntable platterDirectly under the record
    PPX
  • About 2 cm above speaker terminalsThe first place to try on speakers
    ST-RS
  • Speaker wires and interconnectsNear the terminals
    QBR-533
  • Valves and power plugsSlid over the valve or plug
    R-755
  • Cable connectorsTwo on the right channel, one on the left
    OP-W31
  • The listening roomUpright on a DS-1 pad
    QM5

In use

In real listening rooms.

At the sourceHE-R1 PRO X on a high-end transport.
On the turntablePPX under the record.
On valvesRings on a valve amplifier.

Photos: Sixth Element

Talk to us

Tell us about your system.

Visit our Far East Plaza store and we'll walk you through it. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Shop by usage / Vehicle

Shop by usage · 03 / DRIVE

Vehicle. Tune the drive.

Cars and motorcycles run on one electrical system. Start at the 12V socket, then work through the engine bay and the sound system.

9 products

For cars, bikes and car audio.

Applications

Where it goes in your car.

Start with the PowerBar, then add pieces where you want them. Tap a product to see the full page.

  • The 12V socketPlug it in like a lighter plug
    POWERBAR
  • MotorcyclesFit the Socket-1 DC socket first
    POWERBAR + SOCKET-1
  • Battery terminals, radiator hoses, fuel and ignition linesCable-tied in the engine bay, sized by engine cc
    POWERCHIP
  • Battery terminals, fuse box, ignition coilStickers in the engine bay
    ST-RT
  • Dashboard, pillars, side windowsInside the cabin
    ST-RS · ST-RT
  • Back of your car speakersFixed with 3M tape
    DTX
  • Car-audio signal and speaker cablesBehind the head unit or at the amp
    QBR-533

Proof on the dyno

Before and after, on a Dynapack dyno.

Two Mitsubishis, run on the same chassis dynamometer at Tham Seng Autotronic in Singapore, before and after Sixth Element was installed. Both cars made more power and more torque.

+5 to 9%more peak power
+5 to 9%more peak torque
2 carstested on a Dynapack
SAEstandard correction

TEST 01 · 16 JAN 2008

Mitsubishi Lancer CS3

Peak power+9.2 hp +8.5%
Before107.7 hp@ 6,185 rpm
After116.9 hp@ 6,035 rpm
Peak torque+13.6 Nm +9.4%
Before145.1 Nm@ 3,123 rpm
After158.7 Nm@ 2,874 rpm

Peak torque now arrives earlier, at 2,874 rpm instead of 3,123. The gain holds across the whole rev range, from 1,500 to 6,800 rpm.

TEST 02 · 11 JUN 2008

Mitsubishi Colt VR

Peak power+8.1 hp +5.2%
Before154.8 hp@ 6,170 rpm
After162.9 hp@ 6,358 rpm
Peak torque+11.2 Nm +5.3%
Before209.8 Nm@ 4,480 rpm
After221.0 Nm@ 4,485 rpm

Stronger from about 2,900 rpm to redline, with the biggest gains between 3,300 and 4,500 rpm, where you do most of your overtaking.

Tested by Tham Seng Autotronic, Singapore, on a Dynapack chassis dynamometer. Flywheel figures, SAE correction. Red = before, blue = after installing Sixth Element. Results from one car in one session each. Your car may differ.

In use

Fitted by Japan's car-audio installers.

Competition car-audio buildA boot install with twin Micro-Precision amps, tuned with Sixth Element.
DTX on a car speakerOn the back of a Ground Zero speaker, fixed with 3M tape.

Photos: Sixth Element partner, Japan

Talk to us

Not sure where to start on your car?

Visit our Far East Plaza store and we'll walk you through it. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Shop by usage / Household

Shop by usage · 04 / LIVING

Household. Tune everyday things.

Power strips, appliances and the cups on your table. Where Sixth Element fits into daily life at home.

6 products

For power, appliances and the table.

Applications

Where it goes around the house.

Tap a product to see the full page.

  • Power strip surfacesWhere your devices draw power
    ST-RS
  • Air-con vents and home appliancesLarge, flat areas
    ST-RS
  • Everyday devices and small appliancesTight spots
    ST-RT
  • Water bottles, cups, teacups and wine glassesSlipped round the outside
    R-575
  • Under a cupUsed as a coaster
    DS-1
  • On the tableUsed as a table mat
    PPX
  • Home distribution boardCable-tied on, by a licensed electrician only
    POWERCHIP

Anything inside your home's distribution board must be fitted by a licensed electrician.

Talk to us

Ask us what fits your home.

Visit our Far East Plaza store and we'll walk you through it. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Shop by usage / Personal Wearing

Shop by usage · 05 / WEAR

Personal Wearing. Wear the field.

Rings, bracelets, necklaces and apparel, made with the same A.I.S materials. We sell them as style pieces. Sixth Element states they have no medical effect.

4 products

Style pieces with A.I.S inside.

Applications

Where to wear it.

Tap a product to see more.

Worn pieces can't be returned for hygiene reasons, so try the fit in store first.

In use

Everyday, understated.

Worn as an ankletR-575 as an everyday style piece.

Photos: Sixth Element

Talk to us

Come in and try the fit.

Visit our Far East Plaza store and we'll walk you through it. We're the team behind Jason & Sherron Handmade, trusted by Singapore's luxury watch retailers since 2006.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

Home / Partners / Workshop partners

Partners · Authorised installers

Fit Sixth Element. Grow your workshop.

We're looking for car-audio, performance, electrical and motorcycle workshops in Singapore to stock and fit Sixth Element. You get partner pricing, hands-on training and customers who want it installed properly.

Apply as a workshop partner

Partner pricingTrade prices on the full Sixth Element range, so every fit carries your margin.
Customers sent to youListed on this site as an authorised installer. Buyers who want it fitted are sent your way.
TrainingA hands-on session at Far East Plaza: what goes where, how much to fit, and how to explain it.
Your work featuredYour installs on our Applications page and social channels, credited to your workshop.

What you'd fit

Quick installs that sit beside the work you already do.

Nothing is cut or rewired. Most fits take minutes and add to a service, an audio build or a detailing job.

  • Engine bayTied onto the fuel line, air intake, ignition wiring and battery terminals
    PowerChip
  • Car cabin & 12VPlugged into a spare 12V socket, with a switched socket where needed
    PowerBar · Socket-4
  • Car audioAmplifier boards, power-supply cans, speaker magnets and signal cables
    MARS Sticker · DTX Pad
  • MotorcyclesThe PowerBar on the bike's DC socket, PowerChips on the fuel and ignition lines
    PowerBar · Socket-1
  • Home audio & AV shopsBalls, rings, pads and disc stabilisers for hi-fi and home theatre
    A.I.S range

See real installs from Sixth Element's partners in Japan on the Applications page.

How it works

From application to your first fit.

  1. 01

    Apply

    Send the form below. We reply within 2 working days.

  2. 02

    Meet and try it

    Visit us at Far East Plaza, or we come to your workshop with demo units. Fit them on your own car and judge for yourself.

  3. 03

    Training and first order

    A short hands-on session, then your first stock order at partner pricing.

  4. 04

    Go live

    We list your workshop on this site as an authorised installer and start sending customers.

Who we're looking for

Workshops that care how a job is done.

  • A registered business in SingaporeWith a UEN and a fixed workshop or showroom
  • You already fit parts or electronicsCar audio, electrical, performance, servicing, detailing or motorcycles
  • You sell it honestlyDescribe each product as Sixth Element does, show the dyno results as tested, and never promise a customer a fixed fuel saving

Apply

Become a workshop partner.

Tell us about your workshop. We'll contact you within 2 working days to arrange a visit.

Far East Plaza #03-70
14 Scotts Road
Singapore 228213

What you install